Setting Tone Control - Samsung HT-AS1 Instruction Manual

Setting Tone Control

This function allows setting up the tone quality of the front speaker.
REMOTE CONTROL
1
2
3
4
To exit setup mode
•
Using the TONE button
1 Press TONE button.
•
2 Press ...† button to set the tone control you want.
•
•
36
√
Press MENU button, and then press ENTER button.
• "SETUP MODE" appears on the display and goes into Setup Mode.
Press button to select the "TONE CONTROL",
and then press ENTER button.
Press button.
Each time you press this button, BASS TREBLE TONE : OFF will be
•
selected in turn.
If it is set to TONE: OFF, the Tone Control function will be disabled.
•
Press ...† button to set the tone control you want.
You can adjust it from -6 to +6dB by 1 step.
•
The sound gets smaller at -6dB and louder at +6dB.
•
Wait for about 5 seconds or press MENU button.
"SETUP OFF" appears on the display and Setup Mode is exited.
Each time you press this button, BASS TREBLE TONE : OFF will be
selected in turn.
You can adjust it from -6 to +6dB by 1 step.
The sound gets quieter at -6dB and louder at +6dB.
Tone Control function is available only in the Stereo mode.
•
MAIN UNIT
1
Press SETUP button.
"SETUP MODE" appears on the display and goes into Setup Mode.
•
2
Press FUNCTION button to select the "TONE CONTROL".
3
Press SURROUND MODE button.
Each time you press this button, BASS TREBLE
•
selected in turn.
4
Press SELECT( ) button to set the tone control you
,
want.
You can adjust it from -6 to +6dB by 1 step.
•
The sound gets smaller at -6dB and louder at +6dB.
•
To exit setup mode
Wait for about 5 seconds or press SETUP button.
•
"SETUP OFF" appears on the display and exits Setup Menu.
GB
TONE : OFF will be
37