Table of Contents
Advertisement
EDS 20H Hand-held Electrostatic Discharge
3.5 General
The equipment must not be subjected to:
4 Initial Operation
Persons with heart pacemakers must not be in the vicinity when the system is
operating!
4.1 Visual Checks
During transport EDS 20H may be subjected to excessive shocks and vibrations, even
though every care is taken by 3ctest to provide suitable packaging. Before operating the unit,
check for signs of mechanical damage. Damaged packing cases may by a sign of transport
damage. Damage caused in transit must be reported to the shipping agent immediately.
If damage to EDS 20H or its charging unit can be seen or is suspected, do not
apply any voltage!
4.2 Installation
This equipment should only be operated in a Faraday cage or other suitable
environment!
Connect one side of the black ground cable to earth connection
20H, located in front of the trigger button, and the other to the ground system of your
test setup. Failure to make secure earth connection may result in electrical shock.
Securely place correct discharge tip (air or contact discharge, depending on your test
requirement).
Web：
www.3ctest.cn
Simulator---User Manual
Direct solar radiation
Water ingress
Dirty or dusty atmospheres
Excessive vibration
Electromagnetic interference
6 /28
3CTEST
20151021 V1.1
（
）
2
on the EDS
E-mail
info@3ctest.cn
Advertisement
Table of Contents
