Table of Contents
Advertisement
Simulator---User Manual
3CTEST
20151021 V1.1
EDS 20H Hand-held Electrostatic Discharge
Fig.6 discharge tips
Fig.7 Discharge tip position
1) The discharge tip can easily be placed or removed
2) Ensure correct tip type is used before each test
3) We recommend that you remove the tips when testing is complete and place within a
safe area to avoid damaging
5.2.6 RC modules
The basic version of EDS 20H is supplied with the 150pF /330Ω IEC/ISO RC module.
Additional modules are available. More details please refer to section ―Accessories and
Options‖.
To replace RC module, remove the cover at the side of EDS 20H as seen in figure 8. A
small pull-out handle on the RC module is used for pulling out the RC module from EDS
20H.
Never remove the RC module while EDS 20H is in operation. Switch off unit and
wait at least 10 seconds before removing. Failure to do this may result in electrical shock.
Web：
www.3ctest.cn
11 /28
E-mail
info@3ctest.cn
Advertisement
Table of Contents
