3ctest EDS 20H User Manual page 20

EDS 20H Hand-held Electrostatic Discharge
d) Trig-Mode: Auto/Manu
Touch Up/Down to select trigger mode and set Auto/Manual.
Note: Only can choose Manu for air discharge mode.
e) Power Off
Touch Up/Down to select Power off and set, EDS 20H will be powered off.
6.2.4 Voltage setting
（1）
Voltage
Select Value/
（2）
Select Standard
（3）
（4）
（5） ▲▼
（6）
Web： www.3ctest.cn
Simulator---User Manual
Fig.14 Voltage setting-1
voltage
Select voltage setting or test standards (test standards
selection seen as figure 16)
Left or right, moving the cursor to set voltage
Confirm
Up/Down to reduce or increase the value of voltage
Cancel
Fig.15 Voltage setting-2
16 /28
3CTEST 20151021 V1.1
E-mail info@3ctest.cn