Charging The Equipment; Operation; Switching On And Off; General Working Instructions - Grizzly AGS 360 Lion Translation Of The Original Instructions For Use

Charging the Equipment

1. Connect the plug (16) on the
charging cable from the charger
to the charging socket (6) on the
equipment.
2. Connect the power supply unit
(15) to a socket.
The charging indicator (5) lights
up:
Red: The equipment is charging
Green: Charging complete.
The recommended charging
time is max. 3 – 5 hours.
3. When charging is complete,
first disconnect the charger plug
from the socket then the charg-
ing cable plug (16) from the
equipment.

Operation

Keep to noise abatement regula-
tions and other by-laws.

Switching on and off

1. Remove the blade guard before
switching the unit on.
2. To switch on, press the start
lock (8). Whilst it is depressed,
push the on/off switch (7) then
release the start lock.
The equipment runs at top
speed. The power indicator (1)
is lit up in red.
3. In order to switch off, let go of
the on/off switch (8).
After switching the unit off, the
blades take a short time to stop
moving. Let the blades come
to a complete standstill. Do not
touch the moving blades and
do not try to stop them moving.
Injury hazard!

General working instructions

While trimming, take care that
there are no objects such as wire,
metal parts, stones etc. come into
contact with the blades. This can
lead to cutting head damage. If the
blades become blocked by solid
objects, switch off the unit at once.
• Only use sharp blades to achieve a
good cutting performance and pre-
serve the battery.
• Do not work the unit so hard that it
comes to a standstill.
• Pay attention to the instructions on
unit maintenance and cleaning.

Turning the Cutting Head

To cut sloping or vertical edges, the cut-
ting head can be turned 90° to the right
or left.
Push forward the locking bolt
(3) on the equipment and turn
the cutting head (2) at the same
time. When the locking bolt (3) is
released, it clicks into the desired
position.

Use as a grass trimmer

• Grass is best cut when dry and not
too long.
• Move the unit forward evenly.
GB
75