Tv Aspect Ratio; Black Level; Ntsc Disc Output; Dvd Out - Samsung SV-DVD40 Instruction Manual

DVD

TV Aspect Ratio

Set the aspect ratio (length x width) of your TV screen so the DVD
Setup player will display movies at the appropriate size for your
Setup
television. Choose from standard, letterbox, or widescreen format.
Display Setup
Setup :
1 Open "MENU"
With the DVD in stop mode, press the MENU button.
2 Select "DVD"
Use the
Display Setup then press the OK or
TV Aspect : 4:3 L-Box

Black Level

3 Select "Dispaly Setup"

NTSC Disc Output

: PAL 60Hz
Highlight "Display Setup," then press the OK or
DVD Output : RGB
4 Select "TV Aspect"
5 Set "TV Aspect"
Highlight "TV Aspect," then press the
of the following options:
• 4:3 Letter Box – This method displays the full width of the
widescreen movie on a standard 4:3 television. As a result,
black bars will appear at the top and bottom of the screen.
• 4:3 Pan Scan – The familiar way of watching DVD and VHS
movies, this method selectively crops (by panning and scanning
to keep the most important part of the picture visible) wide
screen movies to fit a standard 4:3 television screen.
• 16:9 Wide – This method allows you to view the full 16:9 picture
on a widescreen television.
DVD
Black Level
1 Open "MENU"
Setup
With the DVD in stop mode, press the MENU button.
Setup
Display Setup
Setup :
2 Select "DVD"
Use the
then press the OK or
3 Select "Display Setup"
Highlight "Display Setup", then press the OK or
4 Set "Black Level"
Display Setup
Highlight "Black Level," then press the OK or
TV Aspect : 4:3 L-Box
Off
Black Level
select one of the following options:
On
NTSC Disc Output : PAL 60Hz
Adjusts the brightness of the screen.
DVD Output : RGB
• Off -This is the Standard NTSC reference Black Level for
consistent brightness/contrast across all sources.
• On - This will enhance the Black Level for increased
brightness/contrast when viewing DVDs.
52
or
❷ buttons to highlight "DVD "
❿
buttons.
❿
buttons.
or
❷ button to select one
or
buttons to highlight "DVD "
❷
❿
buttons.
❿
buttons.
❿
buttons to
NTSC Disc Output
1 Open "MENU"
With the DVD in stop mode, press the MENU button.
2 Select "DVD"
or
Use the ❷ buttons to highlight "DVD "
❿
then press the OK or buttons.
3 Select "Dispaly Setup"
❿
Highlight "Display Setup," then press the OK or buttons.
4 Set "NTSC Disc Output"
❿
Highlight "NTSC Disc Output" then press the OK or
to select one of the following options:
Depending on a disc, you can play a NTSC DVD disc by
PAL 60Hz mode.

DVD Out

1 Open "MENU"
With the DVD in stop mode, press the MENU button.
2 Select "DVD"
Use the or buttons to highlight "DVD "
❷
❿
then press the OK or buttons.
3 Select "Display Setup"
❿
Highlight "Display Setup", then press the OK or buttons.
4 Set "DVD Out"
❿
Highlight "DVD Out", then press the or OK buttons to select one
of the following options:
• RGB – Sends RGB signal to the AV JACK (SCART terminal).
• Video – Sends COMPOSITE VIDEO signal to the AV JACK
(SCART terminal).
• S-Video – Sends S-VIDEO signal to the S-JACK.
DVD
Setup
Setup
Display Setup
Setup :
buttons
Display Setup
TV Aspect : 4:3 L-Box
Black Level
NTSC Disc Output : PAL 60Hz
DVD Output : RGB
DVD
Setup
Setup
Display Setup
Setup :
Display Setup
TV Aspect : 4:3 L-Box
Black Level
NTSCDisc Output : PAL 60Hz
DVD Out : RGB
53
NTSC
PAL 60HZ
RGB
Video
S-Video