Selecting The Colour Mode; Nicam; Intelligent Picture Control - Samsung SV-DVD40 Instruction Manual

VCR

Selecting the Colour Mode

Before recording or playing back a cassette, you can select the
Language : English
required system standard.
Otherwise, the system automatically selects the reception standard
Install
User Set
when you select AUTO.
Auto Power Off : Off
Screen Messages : On When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
SV-DVD 50/SV-DVD 55
If your TV is Multi System TV (NTSC 4.43 compatible), set
User Set
NT4.43 and you can record NT4.43.
Auto
Colour System : Auto
PAL

NICAM

: On B/W
1 After pressing the MENU, press the OK or ❿ .
IPC : On
Result:
VideoPlus Extend : Off
2 Press the corresponding
User Set
3 Press the OK or ❿ to select this option.
Result:
SV-DVD 40
4
Press the corresponding
System
User Set
Colour System : Auto
5 Press the Ok or ❿ button to select
NICAM : On
Auto When playing back a cassette, the system standard is
IPC : On
B/W
6
On completion, press RETURN three time to exit the menu.
VCR
NICAM
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
Language : English sound broadcast and you can select the desired sound.
Please refer to page 39.
Install
User Set
1 After pressing the MENU, press the OK or ❿ .
Auto Power Off : Off
Result:
Screen Messages : On
2 Press the corresponding
User Set
3 Press the OK or ❿ to select this option.
Result:
4
Press the corresponding
s selected.
User Set
Colour System : Auto 5
To...
On
NICAM : On
Off
Mono mode
IPC : On
VideoPlus Extend : Off
NICAM mode
6
On completion, press RETURN three times to exit the menu.
26
The Setup menu is displayed.
, buttons to select the
❷
option.
The User Set menu is displayed.
or buttons, until the Colour
❷
option is selected.
Auto PAL B/W .
automatically selected by the DVD-VCR.
Black and White
The Setup menu is displayed.
, buttons to select the
❷
option.
The User Set menu is displayed.
or buttons, until the NICAM option
❷
Press OK or ❿, until...
Off is displayed.
Off: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo
sound is distorted due to inferior
reception conditions.
On is displayed.
On: Normally set at this position.

Intelligent Picture Control

The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1
During playback, press the MENU button on the remote control.
Result: The Setup menu is displayed.
2 Press the OK or ❿ .
Result: The Setup menu is displayed.
3 Press the corresponding , buttons to select the
❷
User Set option.
Press the OK or ❿ buttons to select this option.
4
Result: The User Set menu is displayed.
5
Press the corresponding or buttons, until the
❷
selected.
6 Press the Ok or ❿ buttons to select the IPC (intelligent picture
control) option.
When intelligent picture control mode is On , the sharpness
of the image is adjusted automatically.
7
To adjust the sharpness manually, press the button to turn the
❷
Off
IPC mode .
8 Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
9 On completion, press the RETURN button again.
Intelligent Picture Control ( Remote Control )
1
During playback, press the IPC button.
Result: The PICTURE menu is displayed.
2
Press the button to turn the IPC (Intelligent Picture Control)
❷
option On and Off .
When Intelligent Picture Control mode is ON
of the image is adjusted automatically.
3
To adjust the sharpness manually, select Intelligent Picture Control
mode OFF .
The horizontal picture adjusting appears.
4 Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
5 On completion, press the IPC button again.
VCR
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
Clock Set
IPC option is
User Set
Colour System : Auto
NICAM : On
IPC : On
VideoPlus Extend : Off
VCR
OK
, the sharpness
5
27
On
Off