Mpeg-2 Digital Out; Dts; Dynamic Compression; Pcm Down Sampling - Samsung SV-DVD40 Instruction Manual

DVD

MPEG-2 Digital Out

If your A/V receiver is equipped with a MPEG-2 decoder, your
DVD-VCR can output MPEG-2 sound, but you MUST enable this
feature in the menu system to prevent damage to your speakers.
Setup
Setup
Display Setup
Setup : 1 Open "MENU"
With the DVD in stop mode, press the MENU button.
2 Select "DVD"
Use the
then press the OK or
3 Select "Audio Setup"
Highlight "Audio Setup," then press the OK or
Dolby Digital Out
MPEG-2 Digital Out
4 Set "MPEG-2 Digital Out"

DTS

Highlight "MPEG-2 Digital Out," then press the

PCM Down Sampling

button to select one of the following options:
• PCM - To use your DVD-VCR with an A/V receiver NOT
equipped with a Dolby Digital decoder.
• Bitstream – To use your DVD-VCR with an A/V receiver
equipped th a Dolby Digital decoder.
DVD
DTS
If your A/V receiver is equipped with a DTS decoder, your
DVD-VCR can output DTS digital sound, but you MUST enable this
feature in the menu system.
Setup
NOTE: Select "On" ONLY if you have connected a DTS-equipped
Setup
Display Setup A/V receiver to the DIGITAL AUDIO OUT (optical or coaxial) on
Setup :
the DVD-VCR back panel.
1 Open "MENU"
With the DVD in stop mode, press the MENU button.
2 Select "DVD"
Use the
then press the OK or
Dolby Digital Out
3 Select "Audio Setup"
MPEG-2 Digital Out
Off
Highlight "Audio Setup," then press the OK or
DTS
On
PCM Down Sampling
4 Set "DTS"
Highlight "DTS", then press the OK or
the following options:
• Off - To use your DVD-VCR with an A/V receiver NOT equipped
• On – To use your DVD-VCR with an A/V receiver equipped with
50
or
buttons to highlight "DVD "
❷
❿
buttons.
❿
buttons.
❿
or OK
or
❷ buttons to highlight "DVD "
❿
buttons.
❿
buttons.
❿
buttons to select one of
with a DTS decoder.
a DTS decoder.

Dynamic Compression

Dynamic Compression constrains the dynamic range, i.e. the
difference between the quietest and loudest passages of a DVD
soundtrack. This enables you to limit loud noises, such as
explosions, or raise the volume of quiet passages, such as
whispering, while watching a movie. This is convenient for viewing
movies late at night.
1 Open "MENU"
With the DVD in stop mode, press the MENU button.
2 Select "DVD"
Use the or buttons to highlight "DVD "
❷
❿
then press the OK or buttons.
3 Select "Audio Setup"
❿
Highlight "Audio Setup," then press the OK or buttons.
4 Set "Dynamic Compression"
Highlight "Dynamic Compression," then press the OK or
buttons to select one of the following options:
• On - The total dynamic range of the DVD soundtrack will be
compressed, so quiet passages will be louder and loud
passages will be softer.
• Off – The original dynamic range will be preserved.
PCM Down Sampling
1 Open "MENU"
Press the MENU button while the DVD is in Stop mode.
2 Select "DVD"
or
Use the buttons to highlight "DVD "
❷
❿
then press the OK or buttons.
3 Select "Audio Setup"
❿
Highlight "Audio Setup," then press the OK or buttons.
4 Set "PCM Down Sampling"
Highlight "PCM Down Sampling", then press the OK or
select one of the following options:
• Off – When the disc with 96K of Audio disc insert in, it will output
96K without any change.
• On - When the disc with 96K Audio inserted in, it will downsize
96K to 48K and output it.
DVD
Setup
Setup
Display Setup
Setup :
Dolby Digital Out
MPEG-2 Digital Out
DTS
❿
PCM Down Sampling
DVD
Setup
Setup
Display Setup
Setup :
❿
buttons to
Dolby Digital Out
MPEG-2 Digital Out
DTS
PCM Down Sampling
51
Off
On
Off
On