Pcm Down Sampling; Tv Aspect Ratio - Samsung DVD-V4500 User Manual

12/10/03 10:57 AM Page 16
Dynamic Compression
with a DTS decoder, Dynamic Compression restrains the dynamic range of
digital sound, but you sounds, i.e. the difference between the loud and quiet
menu system. passages of a DVD audio track.
have connected a
er to the Digital audio
1 Open "MENU"
D-VCR rear panel.
Press the MENU button while the DVD is in Stop
mode.
2 Select "DVD"
e the DVD is in Stop
Use the UP/DOWN buttons to highlight "DVD"
then press the ENTER button.
3 Select "Audio"
to highlight "DVD"
Highlight "Audio", then press the ENTER button.
n.
the ENTER button.
4 Set "Dynamic Compression"
Highlight "Dynamic Compression", then press the
RIGHT button to select one of the following options:
• On – This will compress the total dynamic range
of the DVD audio, making quiet passages
the RIGHT button to
in the audio signal louder and loud
ptions:
passages softer.
V with an A/V receiver
• Off – This will preserve the original dynamic
a DTS decoder.
range.
V with an A/V receiver
S decoder
Off

PCM Down Sampling

On
ENG-16
Downloaded From DvDPlayer-Manual.com Samsung Manuals
If your amplifier is not capable of reproducing a 96kHz
signal, PCM downsampling should be set to on.
1 Open "MENU"
2 Select "DVD"
3 Select "Audio"
4 Set "PCM Down Sampling"
On
On
On
Off
: On Off
PCM Down Sampling
Press the MENU button while the DVD is in Stop
mode.
Use the UP/DOWN buttons to highlight "DVD "
then press the ENTER button.
Highlight "Audio", then press the ENTER button.
Highlight "PCM Down Sampling", then press the
RIGHT button to select one of the following options:
• On – When a 96K audio disc is played, 96K will
be downsampled to 48K and outputted.
• Off – When a 96K disc is played, 96K will be
outputted.
On
PCM Down Sampling : On
Off

TV Aspect Ratio

Set the aspect ratio (length x width) of your TV screen
so the DVD player will display movies at the
appropriate size for your television. Choose from
standard, letterbox, or widescreen format.
1 Open "MENU"
Press the MENU button while the DVD is in Stop
mode.
2 Select "DVD"
Use the UP/DOWN buttons to highlight "DVD"
then press the ENTER button.
3 Select "Display"
Highlight "Display", then press the ENTER button.
4 Set "TV Aspect"
Highlight "TV Aspect" then press the RIGHT button
to select one of the following options:
• Widescreen - This method allows you to view the
full 16:9 picture on a widescreen television.
• Letterbox - This method displays the full width of
the widescreen movie on a standard 4:3
television. As a result, black bars will appear at
the top and bottom of the screen.
• Pan-Scan - The familiar way of watching DVD and
VHS movies, this method selectively crops (by
panning and scanning to keep the most important
part of the picture visible) wide screen movies to
fit a standard 4:3 television screen.
Display Setup
ENG-17