Inserting Batteries In The Remote Control; Setting The Date And Time; Menu Language - Samsung SV-DVD3 Instruction Manual

Inserting Batteries in the Remote Control

GB
You must insert or replace the batteries in the remote control when
you:
1
1
2
3

Setting the Date and Time

Your DVD-VCR contains a 24-hour clock and calendar used to:
You must set the date and time when:
MAIN MENU
DVD VCR Option Language
Program Clock Clock Install Exit
CLOCK SET
RETURN ➛!!!❿ ENTER
#❷!!
1
CLOCK SET
12:00 1/JAN/2002
2
TUE
AUTO CLOCK : ON
3
➛!❿!!!
RETURN # ❷
4
5
6
18
Purchase the DVD-VCR
Find that the remote control is no longer working
correctly
Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
Insert two AA, R6 or equivalent batteries, taking care to respect
the polarities:
+ on the battery with + on the remote control
– on the battery with – on the remote control
Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
Do not mix different battery types (manganese and
alkaline for example).
Automatically stop programme recording
Preset your DVD-VCR to record a programme
automatically
You purchase the DVD-VCR
The time and date are set automatically from the
broadcast signal. If the signal is weak or ghosting
occurs, the time and date may not be set automati-
cally. In this case, they should be set manually.
Do not forget to reset the time when you change
clocks from winter to summer time and vice versa.
Press SETUP on the remote control.
Result: The programming menu is displayed.
Press the corresponding , or ➛, ❿ buttons to select the
# ❷
Clock option.
Press the ENTER button to select this option.
Result: The menu is displayed.
CLOCK SET
Press ➛ or ❿ to select the hour, minutes, day, month and year.
Result: The option selected flashes.
Press the or buttons to increase or decrease the value.
# ❷
Result: The day of the week is displayed automatically.
You can hold the or buttons down to scroll more
# ❷
quickly through the values.
On completion, press RETURN to exit the menu.

Menu Language

1 Open "MAIN MENU"
With the DVD in stop mode, press the SETUP button.
2 Set "Language"
Using the Up/Down and Left/Right buttons, move the selection
arrow to Language set then push ENTER button.
3 Set menu Language
Move the selection bar to your desired Language, then push
ENTER button.
GB
SETUP
/ENTER
1
RETURN TITLE SUBTITLE MARK
A DUB SPEED TIMER INDEX
MAIN MENU
DVD VCR Option Language Language
Program Clock Install Exit
LANGUAGE SET
RETURN ➛!!!❿ ENTER
#❷!!
LANGUAGE SET
❿
English
Français
Deutsch
Español
Italiano
Nederlands
RETURN ENTER
#❷!
19