Clearing A Preset Station; Changing The Preset Station Table - Samsung SV-DVD3 Instruction Manual

VCR

Clearing a Preset Station

GB
If you have stored a TV station:
MAIN MENU
you can cancel it.
DVD VCR Option Language
Program Clock Install Install Exit
1
INSTALLATION
RETURN ➛!!!❿ ENTER
"❷!!
2
3
INSTALLATION
AUTO SET UP
MANUAL SET UP 4
VCR OUTPUT CH :CH60
5
RETURN " ❷!!! ENTER
6
TV STATION TABLE 7
PR CH NAME
1 003
8
2
3
4
5
9
❿!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
" ❷
SWAPPING:ENTER
RETURN DELETE:CLEAR
22
That you do not require
At the wrong programme position
Press the SETUP button on the remote control.
Result: The programming menu is displayed.
or ➛, ❿ buttons to select the
Press the corresponding ,
" ❷
Install option.
Press the ENTER button to select this option.
Result: The INSTALLATION menu is displayed.
Press the corresponding or buttons, until the
MANUAL SET
" ❷
UP option is selected.
Press the ENTER button to select a MANUAL SET UP option.
Result: The menu is displayed.
TV STATION TABLE
Press the corresponding or buttons, until the required preset
" ❷
TV station (PR) is selected.
Press the CLEAR button.
6
Repeat the same procedure from Step onwards until all the
required stations have been cleared.
On completion, press the RETURN button three times to exit the
menu.

Changing the Preset Station Table

You can rearrange the Station Table and give different programme
numbers to the stations listed according to your own preferences.
1
Press the SETUP button on the remote control.
2 or ➛, ❿ buttons to select the
Press the corresponding ,
" ❷
Install option.
3
Press the ENTER button to select this option.
Result: The INSTALLATION menu is displayed.
4 Press the corresponding or buttons, until the
MANUAL SET
" ❷
UP option is selected.
5 Press the ENTER button to select this option.
Result: The TV STATION TABLE menu is displayed.
6 Press the corresponding or buttons, until the required preset
" ❷
TV programme is selected.
Result: The selected station is displayed at the same time on
the television screen.
7 To change the programme number assigned to a station press the
ENTER button on the remote control. (For example, To move a TV
station in programme 1 to programme 3)
8 Press the or buttons to select required position.
" ❷
And then press ENTER again to swap the position.
9 On completion, press the RETURN button three times to exit the
menu.
VCR
GB
MAIN MENU
DVD VCR Option Language
Program Clock Install Install Exit
INSTALLATION
RETURN ➛!!!❿ ENTER
"❷!!
INSTALLATION
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH60
RETURN " ❷!!! ENTER
TV STATION TABLE
PR CH NAME
1 003 ----
2
3
4
5
❿!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
" ❷ SWAPPING:ENTER
RETURN DELETE:CLEAR
TV STATION TABLE
PR CH NAME
1
2
3 003 ----
4
5
❿!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
" ❷ SWAPPING:ENTER
RETURN DELETE:CLEAR
23