Plug & Auto Setup - Samsung DVD-V5500 User Manual

Plug & Auto Setup
Your DVD-VCR will automatically set itself up when it
is plugged into the mains for the first time.
TV stations will be stored in memory. The process
takes a few minutes. Your DVD-VCR will then be
ready for use.
1
Connect the RF Cable as indicated on page 11.
(Connecting Your DVD-VCR to the TV using the
RF Cable)
2
Plug the DVD-VCR into the mains.
• "AUTO" in the front panel display flickers.
3
The Language Set menu is displayed.
Press the ... or † button, move the selection
bar to select the desired language then press
OK button.
√ √ English
Français
Deutsch
Español
Italiano
Nederlands
OK
4
Start the auto setup.
Auto Setup will be
started.
Check antenna and TV
cable connection.
16 - English
Language Set
RETURN MENU
MENU
RETURN
5
Start the auto scanning.
The number of stations automatically stored by
the DVD-VCR depends on the number of
stations that it has found.
Please Wait
√ √
6
The current time and date are displayed
automatically.
SETUP
Time
DVD
12 : 00
VCR Auto Clock
PROG
FUNC
OK
Check the date and time.
if it is :
• Incorrect, refer to "Setting the date and time".
(See page 18)
• Correct, press the RETURN button twice to
exit the menu.
Now, you only have to switch the DVD-VCR
on and it is ready for use.
Note
Function for "Plug & Auto Set Up" is fixed
already. So if you want to change this fixed
one, you can change. (refer to "Presetting
the Stations manually" page 20)
Auto Setup
10%
RETURN MENU
Clock Set
Date Year
01 / JAN / 2005 SAT
: On
RETURN
MENU