Repeat Play; Selecting The Recording Speed; Protecting A Recorded Cassette - Samsung DVD-V5500 User Manual

Repeat Play

You can set repeat play to repeat the tape continuously
from beginning to end.
1 Press the MENU button, then press the ... or †
button to select VCR.
SETUP Tape Select

Repeat Play

DVD
VCR
PROG
FUNC
OK
2 Press the OK or √ button.
The Tape Select is highlighted.
Tape Select
SETUP
Repeat Play
DVD
VCR
PROG
FUNC
OK
3 Press the ... or † button to select Repeat Play.
Press the OK or √ button to select On or Off.
Tape Select
SETUP
Repeat Play
DVD
VCR
PROG
FUNC
OK
• On : Repeat play.
• Off : Do not wish to repeat play.
28 - English
VCR Setup
√ √
: E180
√ √
: Off
RETURN MENU
VCR Setup
√ √
: E180
√ √
: Off
RETURN MENU
VCR Setup
√ √
: E180
√ √
: Off
RETURN MENU
Selecting the
Recording Speed
You can record a cassette at two different speeds:
• SP (Standard Play)
• LP (Long Play)
In Long Play modes:
• Each cassette lasts twice as long
• The recording is of a slightly lower quality
1
Press the SPEED button to select SP or LP.
• The selected record speed will appear on the
front panel display.
Type Recording Time (in SP)
E180 180 mins. or 3 hours
E240 240 mins. or 4 hours
E260 260 mins. or 4 hours and 20 mins.
E300 300 mins. or 5 hours
Protecting a Recorded
Cassette
Video cassettes have a safety tab to prevent accidental
erasure. When this tab has been removed, you cannot
record on the tape.
1
If you wish to protect a cassette, break off the tab
using a small screwdriver.
2
To re-record over a protected cassette (safety tab
broken), cover the hole with adhesive tape.