Plug & Auto Setup - Samsung DVD-V7500K User Manual

Plug & Auto Setup
Your DVD-VCR will automatically set itself up when it
is plugged into the mains for the first time.
TV stations will be stored in memory. The process
takes a few minutes. Your DVD-VCR will then be
ready for use.
1 Connect the RF Cable as indicated on page 11.
(Connecting Your DVD-VCR to the TV Using
the RF Cable)
2 Plug the DVD-VCR into the mains.
• "AUTO" in the front panel display flickers.
3 The Language Set menu is displayed.
Press the ... or † button, move the selection
bar to select the desired language then press
OK button.
√ √ English
Chinese
OK
4 The System Selection menu is displayed.
Press the .../†,œ/√ buttons to select your
country.
System - B/G
System - I
U.S - ANT.
U.S - IRC
OK
14 - English
Language Set
RETURN MENU
System Selection
System - D/K
System - B/B
U.S - HRC
Japan
RETURN
MENU
5 Start the auto scanning.
The number of stations automatically stored by
the DVD-VCR depends on the number of
stations that it has found.
Please Wait
√ √
6 The current time and date are displayed
automatically.
SETUP
Time
DVD
12 : 00
VCR
PROG
FUNC
OK
Refer to "Setting the Date and Time" to change
the date and time. (See page 16).
Now, you only have to switch the DVD-VCR
on and it is ready for use.
Note
Function for "Plug & Auto Set Up" is fixed
already. So if you want to change this fixed
one, you can change. (refer to "Presetting
the Stations manually" page 18)
Auto Setup
10%
RETURN MENU
Clock Set
Date Year
01 / JAN / 2005 SAT
RETURN
MENU