Connecting Dvd-Vcr To A Satellite Receiver Or Other Equipment - Samsung DVD-V5500 User Manual

Connecting DVD-VCR to a
Satellite Receiver or Other
Equipment
You can connect your DVD-VCR to a Satellite
receiver or other DVD-VCR using the SCART cable
if the appropriate outputs are available on the
equipment chosen. The following illustrations give a
few examples of the connection possibilities.
1
AV1(EURO AV): By means of 21-pin Scart
Cable
Plug the SCART Cable with satellite receiver or
other equipment into the AV1 (EURO AV) jack
on the rear of the DVD-VCR.
After making this connection, select the source
by pressing the INPUT SEL. button for the AV1
input sources.
2
By means of RF Cable
After making this connection, you must preset
the station received through the satellite tuner.
RF output channel of the satellite receiver
should be adjusted away from channel 60,
which is used by the DVD-VCR, e.g. re-adjust
to channel 65.
Satellite Receiver or other Equipment
TV
1
SCART cable
RF cable
12 - English
Aerial
Aerial Cable
2
* DVD-V6500
1
AV2 IN: By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or
other equipment into the AV2 (DEC./EXT.) jack
on the rear of the DVD-VCR.
After making this connection, select the source
by pressing the INPUT SEL. button for the AV2
input sources.
2
By means of RF Cable
After making this connection, you must preset
the station received through the satellite tuner.
RF output channel of the satellite receiver
should be adjusted away from channel 60,
which is used by the DVD-VCR, e.g. re-adjust
to channel 65.
3
AV(EURO AV) : By means of 21-pin Scart
Cable
Connect the end of the SCART cable to the
AV1(EURO AV) jack on the rear of the DVD-
VCR. Plug the other end into the appropriate
connector on the television.
Satellite Receiver or other Equipment
TV
3
SCART cable
RF cable
Aerial
Aerial cable
2
1