Keypad - DGC DHT- 200Plus Instruction Manual

5.2.3 Keypad

1.Power key
1.Left Key
2.Work piece mark key
1.Right key
2.Work piece mark key
1.Up Key
2.Turn on the printer &
Print current data
1.Down Key
2. Turn off the printer
1.Menu & confirm key 1.Enter into the menu and confirm the settings
1.Menu Esc.
2.Delete key
1.Preview key
1.Display key
1.Print control key
1.Move Printing paper 1. Move the printing paper when printer
1.Indication light of
printer
Hardness Tester DHT-200
1.Power on or off the instrument
1.Adjust the menu items
2.In measuring status, adjust the mark of work
piece (ABCDE)
1.Adjust the menu items
2.In measuring status, adjust the mark of work
piece (ABCDE)
1.Adjust the menu items
2.In measuring status, press one time to turn on
the printer, press twice to print current data
1.Adjust the menu items;
2. In measuring status, press one time to turn
off the printer
1.Exit menu
2. In measuring status, delete error values.
1.Preview the saved files
1.Exchange display
1.Begin / stop Print
disconnected with instrument.
1. Red light: Printer on line
Green light: Printer off line
7
PLUS