Setting Up The Audio Options - Samsung DVD-VR470M User Manual

Video
Title List
TV Type : 4:3 Letter Box
Resolution (HDMI) : Auto
Timer
Video (HDMI) : YCbCr
Edit
Picture Control : Standard
AV1 Output : Video
Dubbing
Component Out : On
Disc
On
Progressive : On
Setting
Off
Setup
Move Ok Return
> s r
12:00
Setup
Title List
Tuner Preset
Clock Set
Timer
Video
Edit
Audio
Features
Dubbing
Options
Disc
Setting
Setup
Move Ok Return
> s r e
Audio
Title List
Digital Out : On
On
Downmix : Dolby Surround
Off
Timer
Audio DRC : Standard
Edit
Audio HDMI : Auto
Scan Audio : On
Dubbing
Surround : Off
Disc
DV Audio Input : Stereo1
Setting
AV Audio Input : Stereo
Setup
> Move s Ok r Return e
Progressive Scan
12:00
This function is available when video output is component. This setting
enables you to select a desired progressive mode. To view "Progressive
scan mode", fi rst connect the component cable. (See page 19) Be sure
the Component cables are connected properly.
•
On
Exit
e
•
Off
M

When the HDMI cable (not supplied) is connected, "Off " can not be
selected.

Progressive setting is only available when the Recorder is in stop
mode.

Setting up the Audio Options

This function allows you to setup the Audio options.
1. With the unit in Stop mode, and press the MENU button.
Press the ▲▼ buttons to select Setup, and then press the OK button.
2.
Press the ▲▼ buttons to select Audio, and then press the OK button.
3.
Press the ▲▼ buttons to select the desired audio option, and then
4.
press the OK button.
Exit
Press the ▲▼ buttons to select the desired item, then press the OK
5.
button.
M

Press the RETURN button to return to the previous menu.
Press the EXIT (
Digital Out
12:00
Selects if audio signals are output from the DIGITAL AUDIO OUT
(COAXIAL).
•
On : Normally select this.
Press the OK button and select "Dolby Digital, " "DTS, " or "MPEG"
for further settings.
Exit
•
Off : The infl uence of the digital circuit upon the analogue circuit is
minimum.
The following setup items switches the method of outputting audio
signals when you connect a component such as an amplifi er (receiver)
with a digital input jack.
For connection details, see "AV Receiver Connections" on page 19.
M

If you connect a component that does not accept the selected
audio signal, a loud noise (or no sound) will come out from
the speakers, and may affect your ears or cause speaker
damage.
Dolby Digital (DVDs only)
Selects the type of Dolby Digital signal.
•
D-PCM : Select this when the recorder is connected to an audio
component lacking a built-in Dolby Digital decoder.
You can select whether the signals conform to Dolby
English - 36
) button to exit the menu.