Setting Up The Audio Options - Samsung DVD-VR325DVD-VR325 Instruction Manual

Setting Up the Audio
Options
Allows you to setup the audio device and sound status
settings depending on the audio system in use.
1 With the unit in Stop mode/No Disc mode, press
the MENU button.
Press the ...† buttons to select Setup, then press
2
the ENTER or √ button.
No Disc
Setup
System
Clock Set
Timer Rec.
Channel Set
Language
Audio
Video
Parental Control
MOVE SELECT RETURN
Press the ...† buttons to select Audio, then press
3
the ENTER or √ button.
Audio setup menu will be displayed.
No Disc
Setup
Digital Output
DTS
Timer Rec.
Dynamic Compression
MOVE SELECT RETURN
Press the ...† buttons to select the desired audio
4
option, then press the ENTER or √ button.
Press the ...† buttons to select the desired item,
5
then press the ENTER or √ button.
■
Press the RETURN or œ button to return to the
previous menu.
Note
Press the MENU button to exit the menu.
Setup
√ √
√ √
√ √
√ √
√ √
√ √
√ √
EXIT
Audio
: PCM
√ √
: Off
√ √
: On
√ √
EXIT
❚
Digital Output
1. PCM : Converts to PCM(2CH) 48kHz
audio. Select PCM when using the
Analog Audio Outputs.
2. Bitstream : Converts to Dolby Digital Bitstream
(5.1CH). Select Bitstream when
using the Digital Audio Outputs.
Be sure to select the correct Digital Output or
no audio will be heard.
Note
❚
DTS
1. Off : Doesn't output digital signal.
2. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS
Decoder.
When DTS soundtrack is played, sound is not
output from Analog Audio Output.
Note
❚
Dynamic Compression
This is only active when a Dolby Digital signal is
detected.
1. Off : You can enjoy the movie with the standard
Dynamic Range.
2. On : When the Movie soundtracks are played at
low volume or from smaller speakers,
the system can apply appropriate
compression to make low-level content more
intelligible and prevent dramatic passages
from getting too loud.
English - 29