Setting Up The Audio Options; Digital Output; Dts; Dynamic Compression - Samsung DVD-VR300E Instruction Manual

Setting Up the Audio
Options
Allow you to setup the Audio device and sound status
depending on the audio system in use.
With the DVD in Stop mode, press the MENU
1
button on the remote control.
2
Select "Setup" using
❿
the or OK button.
3 Select "Audio" using
❿
the or OK button.
Audio setup menu will be displayed.
Programme
❷
4 Use
and press the
Programme
Downloaded From Disc-Player.com Samsung Manuals
❷
buttons, then press
❷
buttons, then press
buttons to select the desired sub menu
❿
or OK button.
PCM
Bitstream
❷
5 Use the buttons to select the desired item.
❿
Then press the or OK button.
Press the RETURN or
the previous menu. Press the MENU button to
Note
exit the menu.

Digital Output

1. PCM : Converts to PCM(2CH) 48kHz audio.
Select PCM when using the
Analogue Audio Outputs.
2. Bitstream : Converts to Dolby Digital/MPEG
Bitstream (5.1CH). Select Bitstream
when using the Digital Audio Output.

DTS

1. Off : Doesn't output digital signal.
2. On : Outputs DTS Bitstream via digital out-
put only. Select DTS when connecting
to a DTS Decoder.
When DTS soundtrack is played, sound does
not output from Analog Audio Output.
Note

Dynamic Compression

1. On : To select dynamic compression.
2. Off : To select the standard range.
➛
button to return to
English - 35