Progressive Scan - Samsung DVD-SR150M Instruction Manual

Hide thumbs Also See for DVD-SR150M:
Table of Contents

Advertisement

Press [Yes] to confirm Progressive scan mode.
Otherwise, press [No].
Yes
No
Press [Yes] to confirm Interlace scan mode.
Otherwise, press [No].
Yes
No
Available Video Output Jack
Setting mode
P.SCAN off mode
Output jack
(Interlace mode)
Component Output
(Y, P
, P
)
B
R
R, G, B
AV1
Scart
Composite
Composite Video out
S-Video out

Progressive scan

If your TV supports Progressive Scan, press the P.SCAN button on the
front of the DVD Recorder.
To view 'Progressive scan mode' , fi rst connect the component cable.
(See page 19)
Be sure the Component cables are connected properly.
Setting up the Progressive scan
1.
With the unit in Stop mode, press the P.SCAN button on the front of
the DVD Recorder.
The message "Press [Yes] to confi rm Progressive scan mode.
Otherwise, press [No]. " will appear.
Press the ◄► buttons to select Yes, and then press the OK button.
2.
3.
Set your TV to Progressive input (using the TV remote control.)
M
If the P.SCAN button on the DVD Recorder's front panel is pressed
during playback, the message "This function is possible only on
stop mode" appears on the screen.
Progressive setting is only available when the DVD Recorder is in
stop mode.
Cancelling the Progressive scan
1.
With the unit in Stop mode, press the P.SCAN button on the front of
the DVD Recorder.
The message "Press [Yes] to confi rm Interlace scan mode.
Otherwise, press [No]. " will appear.
Press the ◄► buttons to select Yes, and then press the OK button.
2.
3.
Set your TV to Interlace input (using the TV remote control.)
M
Do not press the P.SCAN button if you are using a TV that does not
support Progressive mode as nothing will be displayed on the
screen.
If you press the P.SCAN button by mistake when your TV does not
support Progressive mode, the mode will then need to be released.
To release the Progressive mode, press the P.SCAN button on the
front panel 3 times. The screen will recover after the PSO indicator
on the front panel display turns off .
English - 34
Component mode
P.SCAN on mode
(TV in progressive mode)
RGB Mode

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents