Digital Manual Setup; Analogue Manual Setup - Samsung DVD-SR150M Instruction Manual

DVD RECORDER Channel
No Disc
Library
Digital Channel List
Digital Favorite Channel
Guide
Auto Setup
Channel

Digital Manual Setup

Timer Record

Analogue Manual Setup

Disc Manager
Setup
m MOVE s SELECT r RETURN e
Manual Scanning
Country : United Kingdom
Channel Type : Digital
Scan Mode : All
◄ ►
Channel Number : CH 5
◄ ►
Frequency : 178750kHz
◄ ►
Bandwidth : 8MHz
◄ ►
Signal Status 50%
Start Cancel
Manual Scanning
Digital 594.000MHz, BW:8MHz, FFT:Auto
DTV Radio
6 6
Your digital receiver found
BBC ONE BBC ONE
10
DTV Radio 5
BBC TWO BBC TWO
BBC THREE BBC THREE
BBC NEWS 24 OK BBC NEWS 24
BBCi BBCi
CBBC Channel CBBC Channel
Progress
Signal Status
e
DVD RECORDER Channel
No Disc
Library Digital Channel List
Digital Favorite Channel
Guide
Auto Setup
Channel
Digital Manual Setup
Timer Record
Analogue Manual Setup
Disc Manager
Setup
m MOVE s SELECT r RETURN e
Manual Setup
PR CH Name
01 --- ----
02 --- ----
03 --- ----
04 --- ----
05 --- ----
06 --- ----
07 --- ----
Edit Delete Swap
A B C
Time Zone Manual Setup
PR 01
CH ---
◄ ►
Name ----
MFT - - - Ι - - -
Ι
Save
mMOVE sSELECT
Digital Manual Setup
To tune-in new channels, the DVD Recorder has been provided with the
option Manual Scan where the channel data can be entered by user.
|
To setup, follow steps 1~2 in page 26.
|
|
3. Press the ▲▼ buttons to select Digital Manual Setup, then press OK
|
|
or ► button.
4. Select the Channel Number which you want to fi nd using ◄►
EXIT
buttons.
Select Frequency and input the Frequency of the channel you want to
fi nd by pressing the number button.
Select Bandwidth which you want to fi nd using ◄► buttons.
When the valid frequency is input, the bandwidth is selected
automatically. You can select the value of 6,7 or 8 MHz. After select
option. Press OK button to start the scanning process.
EXIT
Analogue Manual Setup
To setup, follow steps 1~2 in page 26.
3. Press the ▲▼ buttons to select Analogue Manual Setup, then press
OK or ► button.
|
|
4. Press the ▲▼ buttons to select a PR(programme) you wish to edit,
|
|
delete, or swap, then press the COLOUR button.
|
Select Edit, Delete or Swap.
•
In case of Edit (RED(A) button) : You can add or edit
EXIT
PR(programme) information. After change PR informations (CH.,
Name, MFT), select Save, then press the OK button.
- CH : Tune the channel using ◄► buttons.
- Name : Display station name automatically detected in
broadcasting signal. If not detected, you can edit name by
using ▲▼◄► buttons.
- MFT(Manual Frequency Tunning) : You can tune up the channel
frequency better using ◄► buttons.
•
In case of Delete (GREEN(B) button) : the channel information of
selected PR(programme) will be removed.
•
In case of Swap (YELLOW(C) button) : You can swap the channel
information of two PR(programme). For example, if you wish to swap
PR2 and PR5, select swap at PR2, then press the OK button at PR5.
English - 27