3 Accessing via Phones ..............10 3.1 Download and Install the APP ..........10 3.2 Power on the IP Camera ............10 3.3 Add the Camera to Your Annke Vision Account ....10 3.3.1 Wireless Connection ..........11 3.3.2 Wired Connection ............. 11 4 ANNKE Cloud P2P ................
Page 3
About this Manual The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons.
Page 4
● Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an extended period, replace the lens cap to protect the sensor from dirt.
Page 6
Description of Network Mini PT Camera Description Silicone Gasket Dome Drive WPS(Wi-Fi Protected Setup) Button Micro SD Card Slot Photic Cover Lens Lens Ring PIR(Passive Infrared) sensor Mounting Base 10M / 100M self-adaptive Ethernet interface Alarm Input/output Reset Audio Out Power supply (5 VDC) Speaker Solid blue: Network is connected, and...
Page 7
Description Flicking blue: No network connection. Solid red: Camera is armed. Flicking red: Camera is not working properly. Solid green: Camera is connected to the platform. How to reset (1) Make sure the device is powered on. Use a pin to press the “Reset”...
1.2 Installing SD Card Steps: 1. Pull the removable cover on the mounting base outwards and move it aside. 2. Insert the micro SD card into the micro SD card slot. 3. Fix the cover back to the mounting base. 2 Installation Steps: 1.
Page 9
2. Align the screw holes on the ceiling and adapter plate, and then fix the adapter plate to the ceiling with the supplied screws. 3. Align the mounting base of the camera to the adapter plate, and rotate the camera clockwise until it is locked up by the three bayonet joints on the adapter plate.
Page 10
4. Adjust surveillance view angle. 1) Hold and rotate the main camera body to adjust the view angle in the pan direction: [0°~355°]. 2) Move the dome drive upwards or downwards to adjust the view angle in the tilt direction: [-20 ° ~90 ° ].
3.1 Download and Install the APP 1. Connect your mobile device to Wi-Fi. 2. Download and install the Annke Vision app by searching the "Annke Vision" in App Store or Google Play. 3. Launch the app and register an Annke Vision user account.
4 ANNKE Cloud P2P With Annke Cloud P2P service, you can realize some certain functions of this product (including, but not limited to, live view, and remote playback) , which depend on the internet and telecom...
4.1 Live View Launch the Annke Vision app and you can get the live view of the connected devices. 4.2 Recording Check the memory card status by tapping on the Storage Status in the Device Settings interface. If the memory card status displays as Not Initialized, tap to initialize it.
Note: Make sure you have enabled Alarm Notification, and you can select "Mute" in [Home]-[I61DQ/I61DS]-[Setting]-[Alarm Notification]-[Notification Sound Mode] if you want to close Alarm sound. 5 Software Download And FAQ If your have problems when using the device or need to download the content contained in the CD, please follow the steps below.
Need help?
Do you have a question about the I61DQ and is the answer not in the manual?
Questions and answers