Initialising The Manual Pushbutton; Operation - GARANT 921401 Instruction Manual

1. Press the power button.
» The start menu will appear.
» Shutdown is pre-selected.
2. Confirm with OK.

4.2. INITIALISING THE MANUAL PUSHBUTTON

E
(Fig. )
i
Fully charge the battery before using it for the first time. Use the mains cable supplied.
1. Plug the control module into a mains socket.
2. Keep the ▲ and ▼ buttons depressed at the same time.
» The system moves at half speed to the bottom mechanical stop.
3. Once the mechanical stop is reached, release the ▲ and ▼ buttons.
» The control module emits an acoustic signal.
» The worktop rises slightly.
» The top and bottom positions are saved.
» The workbench is now ready for use.
i
In the event the control module has been disconnected from the power supply it may be necessary
to repeat this procedure.

5. Operation

CAUTION
Workbench tipping
Risk of injury to hands, feet and body due to unrestrained objects falling in the event of the work-
bench tipping due to incorrect loading.
» Do not store pointed or other workpieces without restraint.
» Ensure during transport that no objects are present on the worktop.
» Ensure during movement and transport that all drawers and cupboard doors are closed and
locked.
www.hoffmann-group.com
en
47