Table of Contents
Advertisement
Keep the following in mind:
•
Set the microphone level before adjusting headphone volume.
•
The headphone volume does not affect the signal level sent to the computer.
Adjusting Headphone Level
Easily adjust the headphone monitoring level by using the MV5C thumbwheel by enabling the MV5C headphone output.
Accessing the Control Panel
Windows
1.
Open the Settings window, select System > Sound.
2.
Select Shure MV5C as your input device.
3.
Adjust the gain by using the Levels slider.
®
Mac
1.
In System Preferences, select Sound.
2.
Select the Shure MV5C device as your Input and Output source.
3.
Use the Input volume slider to adjust the gain.
Monitoring Options for the MV5C
Listening Through the Computer Output
Connect the MV5C to your computer using the USB cable and listen through your computer's built-in speakers or
headphone output. If you are listening to computer audio playback, the headphone LED on the MV5C will be off because the
headphone output is off.
Listening Through the Headphone Output (Direct Monitoring)
When the MV5C headphone output is enabled, the headphone jack provides an equal blend of the direct microphone signal
(your voice) and audio playback from the computer (your conference). This allows you to conveniently adjust the headphone
volume for both with one control, the MV5C thumbwheel.
Press and hold the MV5C Mode button while connecting to your computer using the USB cable. Now connect head-
phones to the MV5C headphone output to hear the audio playback. If you are listening to audio from the headphone out
put, the headphone LED on the MV5C will be green.
To turn off headphone audio, press and hold the MV5C mode button. The headphone LED will turn amber.
Shure Incorporated
6/10
Advertisement
Table of Contents
