Rugged, all-metal construction and excellent cartridge protection for outstanding reliability The MV7X Microphone The MV7X features a dynamic capsule with a cardioid pattern, which uses Voice Isolation Technology to pick up sound directly in front of the microphone. MV7X Output •...
Shure Incorporated Mounting Instructions The MV7X microphone comes equipped with a 5/8"-27 threaded mount, the thread size most commonly found on microphone stands. This mount can be used with a microphone stand or hung from a boom. Note: Be very careful not to unloosen the screws all the way.
Page 5
Shure Incorporated Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 Housing All metal construction Mounting Type 5/8-27 thread mount Net Weight 0.55 kg (1.21 lbs) [1] 1 Pa=94 dB SPL Typical Frequency Response Typical Polar Pattern Overall Dimensions...
Place the flat silver washer and then the thin spring washer on the threaded knob. Using your finger to hold the screw assembly in place, slide the MV7X onto the threaded screw and turn the knob to keep washers in place.
Black Windscreen AMV7-K-WS Certifications This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking. The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance Authorized European representative: Shure Europe GmbH Global Compliance Jakob-Dieffenbacher-Str. 12...