Table of Contents
Advertisement
Command
Query System Mask Command
Set System Gateway Command
Query System
Gateway Command
Set System
TCP Port Command
Query System
TCP Port Command
System reset
Set System
Network Configuration
Query Firmware
Main/Slave Processor
Query Temperature
the fan is set
Choose passthrough port
Request STATUS
of all IN-cards
Request STATUS
of one IN-card x
String
#Mask<CR>
>Gate:x
x= gateway
#Gate<CR>
>Tcp Port:x<CR>
x= TCP port
#Tcp Port:<CR>
>SR<CR>
>Net:a/b/c/d<CR>
a= IP address
b= mask
c= gateway
d= port
#FM<CR>
#TP<CR>
>FANx<CR>
x= 0-99
>TI: U/N/A<CR>
U: usart
N: net
A: usart and net
#IN?<CR>
#INx?<CR>
send: #Mask<0D>
response:
<Mask:255.255.255.0<CR>
send: >Gate:192.168.2.1<CR>
response: <Gate:192.168.2.1<CR>
send: #Gate<CR>
response: <Gate:192.168.2.1<CR>
send: >Tcp Port:1001<CR>
response: <Tcp Port:1001<CR>
send: #Tcp Port:<CR>
response: <Tcp Port:1001<CR>
send:
>NET:192.168.2.140/255.255.255.0/
255.255.2.1/1004<CR>
response:
<NET:192.168.2.140/255.255.255.0/
255.255.2.1/1004<CR>
send: #FM<CR>
response: <FM_mainV1.0.8<CR>
<FM_SlaveV1.0.8<CR>
send: #TP<CR>
response: <TP43<CR>
send: >FAN50<CR>
response: <FAN50<CR>
send: <INx:y,...<CR>
y=0 : no signal, y=1 : signal
detected, y=2 : signal input and
output
Example received data:
<IN2:1,IN3:0,IN4:2<CR>
send: <INx:y,...<CR>
y=0: no signal, y=1: signal
detected, y=2: signal input and
x=1-6
output
Example received data:
<IN4:2<CR>
Example
x=1-6
x=1-6
25
Advertisement
Table of Contents
