Kindermann Multimatrix 8 Operating Instructions Manual page 24

Command
HDBT -
Baud Rate Setup Command
Audio
internal or external
HDMI/DVI output
CVBS
input or output set
Port HDCP
Authorized Command
Set System
RS232 Baud Rate
Setup Input Command
Query System
RS232 Baud Rate, Data Bits,
Parity and Stop Bit Command
Set System IP Command
Query System IP Command
Set System Mask Command
24
String
>BRxRa<CR>
x= 1-8, for more than one port
use a comma to separate.
a= 9600/19200/38400/115200
baud rate
>AExI/E<CR>
x= 1-8, for more than one port use
a comma to separate.
I = Internal Audio
E= External Audio
>OMxH/D<CR>
x= 1-8, for more than one port use
a comma to separate.
H= HDMI
D= DVI
>CVBRxP/N<CR>
x= 1-8,CVBS input
P= 1280x720p60
N= 1920x1080p60
x= 1-8,CVBS out
P= PAL
N= NTSC
>HDCPA/Wx<CR>
A - Authorized
W - Unauthorized
x= 1-8, for more than one port use
a comma to separate.
>RSab<CR>
a= 9600/19200/38400/115200
baud rate
b= 8N1/8E1/8O1, bits, parity, stop
#RS<CR>
>IP:x<CR>
x= IP address
#IP<CR>
>Mask:x
x= mask
Example
send: >BR1R9600<CR>
response: <BR1R9600<CR>
Set HDBT port 1, baud rate to
9600.
Is used to modify Baudrate of
HDBT card.
send: >AE2I<CR>
response: <AE2I<CR>
Set port 2, internal audio
send: >OM8H<CR>
response: <OM8H<CR>
Set output 8, output HDMI
send: >CVBR3P<CR>
response: <CVBR3P<CR>
Set input 3, output 1280x720p60
Set outputt 3, output PAL
send: >HDCPA1<CR>
response: <HDCPA1<CR>
Set port 1 HDCP authorized.
send: >RS96008N1<CR>
response: <RS96008N1<CR>
Set System RS232 baud rate to
9600, 8 bits no parity and 1 stop.
send: #RS<CR>
response: <RS96008N1<CR>
send: >IP:192.168.2.245<CR>
response: <IP:192.168.2.245<CR>
send: #IP<CR>
response: <IP:192.168.2.245<CR>
send: >Mask:255.255.255.0<CR>
response:
<Mask:255.255.255.0<CR>