Test Run - MrCool DIY E Star Series Installation & Owner's Manual

Test Run

Before Test Run
Only perform test run after you have
completed the following steps:
•
the electrical system is safe and operating
properly
•
not leaking
•
pressure) valves are fully open
Test Run Instructions
You should perform the
30 minutes.
1.
2.
Press the button on the remote
controller to turn it on.
3.
Press the button to scroll through the
•
– Select lowest possible temperature
•
– Select highest possible temperature
4.
Page 35
Refrigerant Piping Connection
–
–
for at least
mrcool.com
No electrical leakage
Unit is properly grounded
properly covered
Indoor and outdoor units
are solidly installed
Wall Penetration Sleeve is
packed airtight
do not leak
Water drains properly
from drain hose
insulated
function properly
function properly
Indoor unit louvers rotate
properly
Indoor unit responds to
remote control
9
PASS/FAIL
Outdoor (2): Indoor (2):