Technicolor 4400 Setup Manual

Technicolor Internet Modem
Set Up Guide
Distributel_Modem 4400_How to Guide_Accordian fold.indd 2-4 Distributel_Modem 4400_How to Guide_Accordian fold.indd 2-4
Setting up your High Speed Internet Service
Before you begin:
> Review contents of your install kit:
A coax cable to connect to the network
●
An ethernet cable to connect your device
●
Technicolor 4400 modem and power cord
●
Part 1: Connecting the modem
1
Connect one end of the coax cable to the 'Cable' port
on your modem, then connect the other end of the
cable to a nearby coax wall outlet.
To connect your devices see instructions on the reverse side of this guide.
www.distributel.ca
> Read through instructions
You can fi nd additional self-help
resources at distributel.ca/support
2
Attach the power cord to the 'Power' port on your
modem and plug into a nearby electrical wall outlet.
3
Turn the modem on, and
wait until all lights are on
(the LINK light may fl icker).
This can take about 5 minutes.
2020-07-30 12:01 PM 2020-07-30 12:01 PM