Selecting The Sound Mode - Samsung PS-42P2SB Owner's Instructions Manual

ENG
Mode
Equalizer
Auto Volume
Source
Sound Mode
Dolby Surround
Headphone
Move

Selecting the Sound Mode

Sound
Custom
Off
Main
Stereo
Select Menu
32
Depending on the particular program being broadcast, you can
display and control the processing and output of the audio signal.
When power is switched on, the mode is automatically preset to
either "Dual-I " or "Stereo", depending on the current transmission.
1
Press the MENU button.
Result: The main menu is displayed.
2
Move the joystick up or down until the Sound is selected.
Result: The options available in the Sound group are displayed.
3
Press the joystick button.
4
Move the joystick up or down until the Sound Mode is selected.
5
Select the required sound mode by moving the joystick left or
right.
Type of broadcast
(FM) Mono
(FM) Stereo
(FM) Dual
NICAM Mono
NICAM Stereo
NICAM Dual
You can select these options by simply pressing the
S.Mode (Sound Mode) button on the remote control.
If the receiving conditions deteriorate, listening will
be easier if the mode is set to the Mono.
If the stereo signal is weak and an automatic
switching occurs, then switch to the Mono.
When receiving a mono sound in the AV mode,
connect to the "AUDIO-L" input connector on the
panel of the television. If the mono sound comes out
only from left speaker, press the S.Mode button.
On-screen indication
Mono
Stereo - Mono
Dual I - Dual II
NICAM Mono - Mono
NICAM Stereo - Mono
NICAM Dual I - NICAM Dual II - Mono