ENG
Rear of the
Media Station
Connecting to an Aerial
or
Cable Television
Network
14
(or Cable Television Network)
To view television channels correctly, a signal must be received by
the set from one of the following sources:
An outdoor aerial
A cable television network
A satellite network
1
In the first three cases, connect the aerial or network input cable to
the 75Ω coaxial socket on the rear of the Media Station.
2
If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp
and clear.
For further details, refer to:
"Storing Channels Automatically" on page 20
"Storing Channels Manually" on page 22