Table of Contents
Advertisement
ENG
Before contacting Service Personnel, perform the following simple checks. If you cannot solve the
problem using the instructions below, note the model and serial number of the PDP and contact your
local dealer.
No sound or picture
Normal picture but no sound
No picture or black and white picture
Sound and picture interference
Blurred or snowy picture,
distorted sound
Remote control malfunctions
The power indicator is amber blinking.
Troubleshooting
56
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the Power button.
Check the picture contrast and brightness settings.
Check the volume.
Check the volume.
Check whether the MUTE button has been pressed.
Adjust the colour settings.
Check that the broadcast system selected is correct.
Try to identify the electrical appliance that is affecting the Media
Station, then move it further away.
Plug your television into a different mains socket.
Check the direction, location and connections of your aerial.
This interference often occurs due to the use of an indoor aerial.
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
The monitor is using its power management system.
Check the power management utility on your computer.
Advertisement
Table of Contents
