Connecting Speakers; Connecting Pdp And Speakers; Connecting Stand And Speakers - Samsung PS-42P2SB Owner's Instructions Manual

Connecting Speakers

Connecting PDP and Speakers

Fix the bracket onto the guide
pole located on the rear of
speaker and fasten the screws.
After removing the three
screws on the PDP, clamp the
speaker and the PDP together
and fasten the screws.

Connecting Stand and Speakers

Guide pole
Connect the speaker audio cable to the external speaker output
jack on the rear of the Media Station matching the "+" and "-" ends
of the cable with the diagram on the Media Station.
The speakers MUST have more than 15watts rating (impedance 8Ω).
The ferrite cores are used to attenuate undesired signals. When you connect the speaker wire to the
EXTERNAL SPEAKER OUT (8Ω) connector, bind the speaker wire round the ferrite core to secure it.
Guide pole
Guide pole
Rear of the PDP
When moving your PDP, do NOT hold the
speaker connected to your PDP.
It may damage the bracket clamping the
speaker and your PDP together and
result in a drop of your PDP and a risk of
personal damage and injury.
Rear of the Media Station
13
ENG