Customizing A Drum Kit (Kit Edit) - Roland TD-07 Owner's Manual

Customizing a Drum Kit (KIT EDIT)

The TD-07 let's you customize each pad's sound and adjust the effects to your preferences.
* Since the TD-07 automatically saves the values that you change, there's no need to perform a specific operation to save your
settings. Settings are also saved when you turn off the power.
Kit edit menu
Indication Explanation
INSTRUMENT
Modifies the sound of each pad.
KIT VOLUME Adjusts the volume of the drum kit.
Boosts or cuts the attack or release of
TRANSIENT
each pad's sound.
Adjusts the tonal character of each
PAD EQ
pad (pad equalizer).
Adjusts the sound of the overhead
mics that capture the entire drum kit.
OVERHEAD
This adjusts the sound's spaciousness
and sense of stereo. You can specify
the amount of effect for each pad.
Simulates the reverberation and
resonance of the location in which
you're playing the drums.
By applying the Room effect you can
ROOM
give the drum sound a more natural
feel and a sense of presence. You can
specify the amount of effect for each
pad.
Lets you apply a variety of effects to
MFX the overall drum kit. You can specify
the amount of effect for each pad.
KIT NAME Edit the name of the drum kit.
Specifies the MIDI note number that
MIDI NOTE
is transmitted or received when you
strike a pad.
KIT COPY Copies the settings of a drum kit.
Returns the drum kit settings to their
KIT RESET
factory-set state.
12
Choosing a Pad to Edit
Page
To edit the settings for a pad, strike that pad to select
p. 13 it. To select the rim of a pad, strike the rim.
MEMO
5 You can also select the pad to edit by holding
p. 14
down the [ ] (ENTER) button and using the [C]
[A] buttons.
5 You can also select the head or rim by holding
down the [ ] (ENTER) button and pressing the [ ]
(EXIT) button.
Selecting an instrument for each strike
p. 15
location
For menus in which the "H&R Link" indication is
shown, you can switch between switching sound
parameters for head and rim as a set (ON) or
individually (OFF).
Head and rim parameters are selected as a set.
Recommended parameters are selected as a set
depending on the parameter that you select.
p. 16
* If the items selected as a set include identical
ON
parameters, they are automatically given the
same values.
* For some sounds, the same sound might be
p. 17
selected for both head and rim.
Parameters can be selected independently for head
OFF
and rim.