Table of Contents
Advertisement
Finally, and only after an internet connection
has been established; perform a base station
update as described in this manual.
Your EQ LTE™ base station is ready for use!
Notes:
EQ LTE™ base stations use
conventional DHCP or manual IP
configuration methods.
The manufacturers do not provide
support relating to the use of
ancillary products such as WIFI
dongles.
Network security restrictions may
prevent the EQ LTE™ base station
from accessing the internet
If you experience internet connection
difficulties, contact your local IT
administrator in the first instance!
4.1.3 General operation
A EQ LTE™ base station provides users with a
'PC free' solution for the handling of data
between the quincy.scadar.net cloud
computing environment and EQ LTE™ data
loggers
The EQ LTE™ base station allows users to
download audit configurations from the
quincy.scadar.net cloud computing
environment, wirelessly synchronize audit
configurations with up to 20 EQ LTE™ data
loggers, wirelessly retrieve logged data from
up to 20 EQ LTE™ data loggers and return
logged data to the quincy.scadar.net cloud
computing environment.
Once audit configurations are synchronized,
EQ LTE™ data loggers can log data without
the need for any further connection with the
EQ LTE™ base station.
Although identical in size and rugged in
design, the EQ LTE™ base station is not
intended to accompany data loggers to the
audit location. More typically, the
EQ LTE™ base station will remain connected
to an office local area network with internet
access and act as an instantly accessible
portal for the transfer of data between the
quincy.scadar.net cloud computing
environment and EQ LTE™ data loggers.
Once EQ LTE™ data loggers return from
the audit location, simply synchronize with the
EQ LTE™ base station once more and
transfer your logged data from the EQ LTE™
base station to the quincy.scadar.net cloud
computing environment.
Only one EQ LTE™ base station is required to
manage data between the quincy.scadar.net
cloud computing environment and an infinite
number of EQ LTE™ data loggers.
4.1.4 Technical data
Function:
Handles data between EQ LTE™
data loggers and the quincy.scadar.net
cloud computing environment
Part Number
IP rating:
Dimensions:
(W x H x D): 98 x 203.2 x 34.8mm
Weight:
Connection:
Ethernet:CAT5e 10/100Mbps
LED B: On when 100Mbps connection
USB:
Power:
Input power:
Supplied with EU, UK & US AC heads
Graphic display:
5 tactile key, membrane switch panel
Keypad:
Bluetooth:
V2.1 + EDR (enhanced data rate)
master device with capacity to
simultaneously communicate with up to
Bluetooth
range:
The effective range varies due to propagation conditions,
material coverage, production sample variations, antenna
Pre programmed application software
Software
Languages:
Display
symbols:
Approvals:
Operating temp:
0°C ~ +40°C (+32°F ~ +104°F)
Storage temp:
-25°C ~ +70°C (-13°F ~ +158°F)
<95% condensation @ 40°C (104°F)
Relative
humidity:
4.1.5 Power supply
The EQ LTE™ Base Station is powered
from an external power supply which can be
operated from a regular 'domestic' power
supply.
Operating voltage:
2014900359
IP20
(0.32 x 0.66 x 0.11 ft)
0.31 kg (11 ounces)
RJ45
LED A: flashes to indicate
communications
is detected
Off when 10Mbps is active
USB type B (not used)
100 – 240V AC
50 – 60Hz
0.6 A
as standard
Output power: 24vDC
0.75Amp
1.8M (5 foot) jack lead
3.5" color ¼VGA
construction
20 slave data loggers
10 meters (33 ft)
configurations and battery conditions
configurable via OUI
N/A
ISO7000 and custom
CE, FCC
without condensation
90 - 264 Vac
Page 8
Advertisement
Table of Contents
