Example Procedure - Fagor DDS Series Hardware Manual

  Description
1.3 Stages of the system configuration
1.
32
DDS
HARDWARE
Ref.1912
· 30 ·
The following steps are a reference to configure and install the DDS system.
NOTE. This DDS system configuration process assumes that the motors
of the system are known motors.
All the motors of the FAGOR catalog are described in their corresponding
manuals:
• Manual of synchronous servo motors. FXM, FKM families.
• Asynchronous motor manuals. FM7, FM9 families.

Example procedure

Stage 1. Analysis of the system location
 Ambient conditions
 Mechanical conditions
 Electrical conditions
 Cooling conditions
Stage 2. Component selection
 Motors
 Power supply module
 Drives
 Auxiliary modules
Stage 3. Connection configuration
 See block diagrams
 See connection diagrams
 See dimension drawings
 Power and signal cable selection
 Suggestions for cable installation
 Power line connection
 Electrical cabinet and its ventilation