General Diagram - Fagor DDS Series Hardware Manual

1.2 General diagram

See the schematic description of all the elements that make up the DDS system:
Mains connection.
Three phase 50/60 Hz.TN mains
400 (1-10 %) to 460 (1+10 %) V AC
Mains filters:
MAIN FILTER A-A
Capacitor module CM-1.75.
It is connected in parallel to the
power bus (600 V DC).
Synchronous motors
FKM
F. H1/2
DDS system. Configurations.
Non-regenerative
power supplies
Non-regenerative power supplies
· they integrate the auxiliary power supply ·
PS-25B4
+ modular drives:
for axes: AXD, MMC
for spindle: SPD
Regenerative power supplies
·they integrate the auxiliary power supply·
Regenerative regulated
power supplies
RPS-
·they integrate the
+ CHOKE RPS-
auxiliary power supply·
+ Modular drives:
+ BPM
Compact drives
·they integrate the power supply·
for axes: ACD, CMC
for spindle: SCD
FXM
PS-65A
+ modular drives:
for axes: AXD, MMC
for spindle: SPD
+ auxiliary power supply:
XPS-
+ CHOKE XPS-
+ Modular drives:
for axes: AXD, MMC
for spindle: SPD
for axes: AXD, MMC
for spindle: SPD
R e s i s t o r m o d u l e s E R + T H -  /  o r
ER+TH-18/+FAN.
T h e y a r e c o n n e c t e d t o t h e p o w e r
supplies, the compact drives or to BPM
module.
Asynchronous motors
FM7/ FM9
  Description
APS-24
1.
HARDWARE
DDS
Ref.1912
· 29 ·