Fisher & Paykel ActiveSmart E372B Installation Instructions Manual page 8

4. Connect the 6mm (1/4") tubing to the outlet of the water filter
cartridge as shown in Diagram 2. Gently pull to ensure it is
locked.
5. Measure the required length of tubing to run from the PRV to
the water connection point (no less than 250mm).
6. Cut the tubing making sure the ends are square and clean.
7. Connect the tubing to the faucet connection and
the base of the PRV (white collet) and then to the
faucet as shown in Diagram 3. Please note that the
faucet connection supplied should fit most
installation situations.
https://producthelp.fisherpaykel.com/au/Cool/Fridges/Bottom_Freezer/Without_Ice_and_Water/790mm/RF522BRPX6/User_G...
Diagram 2 Waterline connection to
refrigerator
Diagram 3 Faucet connection
Updated: Mon, 27 Apr 2020 00:46:14 GMT
Powered by
8