Fisher & Paykel ActiveSmart E372B Installation Instructions Manual page 10

Hide thumbs Also See for ActiveSmart E372B:

12. Run the 6mm (1/4") tubing to the back of the

refrigerator ensuring there is enough tubing to pull

the refrigerator out for service.

13. Using the measurement guide shown in Diagram

6, mark out 16mm, on the end of the tubing as

shown in Diagram 7.

14. Insert the tubing marked 16mm into the water

(solenoid) valve up to the marked line as shown in

Diagram 8.

15. Pull gently on tubing to ensure it is locked in as

shown in Diagram 9.

16. The completed installation should look like

Diagram 6.

17. Turn the isolating faucet on and check that all

connections are dry and free of drips.

18. Coil water line tubing behind the refrigerator. Push

your refrigerator into place being careful not to kink

or squash the water line tube running into the

water (solenoid) valve.

19. Read pages 17 – 18 carefully and then turn

refrigerator on.

https://producthelp.fisherpaykel.com/au/Cool/Fridges/Bottom_Freezer/Without_Ice_and_Water/790mm/RF522BRPX6/User_G...

foam attachment

Updated: Mon, 27 Apr 2020 00:46:14 GMT

Table of Contents