Fisher & Paykel ActiveSmart E372B Installation Instructions Manual page 16

Hide thumbs Also See for ActiveSmart E372B:

What to do if your product is unstable

A. Gently push the refrigerator back until the rear rollers

contact the floor.

• Measure the gap under the front foot, which has come

off the floor.

• Obtain some solid packing material (hardwood, plastic,

etc) which fits firmly into the gap under the foot.

Do not use metallic materials that

may corrode, stain and/or

damage floor coverings.

B. Wind both front feet up and roll the product out of

position.

• Place the packing material in the location diagonally

opposite the front roller that lifts off the floor.

• Make sure the packing material stays in place when

the product is pushed back into position.

• Ideally, the packing material is large enough to rest

against the back wall so as to prevent it from moving

when the cabinet is pushed into position.

Roll the refrigerator back into position and adjust front feet as per step 6 C. (Check alignment and door closing

action are satisfactory).

• Make small adjustments to front feet where necessary.

• Check that the product is stable (all 4 feet are on the floor). If not, repeat 8 A and 8 B.

https://producthelp.fisherpaykel.com/au/Cool/Fridges/Bottom_Freezer/Without_Ice_and_Water/790mm/RF522BRPX6/User_G...

Unstable refrigerator

Updated: Mon, 27 Apr 2020 00:46:14 GMT

Table of Contents