Pre-Assembly; Planning Assembly; Tools Required; Hardware Included - HAMPTON BAY HD10 Use And Care Manual

Pre-Assembly

PLANNING ASSEMBLY

Before You Start, check the contents of the box and make sure you have all the parts and fittings listed. If not, contact Hampton Bay
Customer Service at 1-855-HD-HAMPTON. When you are ready to start, make sure that you have the right tools at hand, plenty of space and
a clean dry area for assembly.
WARNING: While every precaution has been made in the
manufacture of this product, care must be taken during
assembly in case sharp edges are present.
NOTE: Please lay out all nuts and bolts and check lengths
before assembly.

TOOLS REQUIRED

Adjustable
wrench x 2

HARDWARE INCLUDED

NOTE: Hardware not shown to actual
size.
AA
Part Description
AA 1/4 in. dome head bolt
BB 1/4 in. nut
CC 1/4 in. hex bolt
DD 1/4 in. washer
EE 5/16 in. washer
FF 5/16 in. bolt
GG 1/4 in. spring washer
1/4 in. Spanner
BB CC
Quantity
NOTE: It is recommended that the carton is cut open and
spread out on the floor and used as a protective surface
during assembly.
NOTE: Refer to the assembly diagrams as necessary.
DD
27
33
19
7
3
3
7
5
Please contact 1-855-HD-HAMPTON for further assistance.
EE FF
HAMPTONBAY.COM
GG