Traditional Mode(Normal); Link Preparation - Ebyte E103-W02 User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.
3
SmartConfig（one-key configuration）cellphone app"Wi-Fi Starter"

3.1 Traditional mode(NORMAL)

3.1.1 Link preparation

First of all, you need to know that when the module is restored to factory settings or the default
status, the network role is AP, and the network mode is NORMAL mode. First, we need to connect the
PC to the module to establish a network connection.
①. Connect the factory-made E103-W02 baseboard to the PC through the Micro USB data cable.
②. Open the serial port debugging assistant "AccessPort" and select the port number; if you don't
know the port number, please check in the device manager (see the picture below)
③ Set the serial port debugging parameters (baud rate: 115200bps, data bit: 8bit, parity bit: no parity,
stop bit: 1bit).(See the picture below)
④. We open the wireless network on the PC, find the wireless network with SSID beginning with
"EBT" (such as: EBT_9BB311), and click on "Next" to connect. ("9BB311" here is the last 6 digits of
the module MAC address. The MAC address of different modules is different, so the SSID of different
modules is also different.)
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co.,Ltd.
E103-W02 User Manual
10