Interlogix NX-181xx NetworX Installation Manual page 11

6. [MENU] Moves back to step 4, keypad option selection.
4. [3] Option 3 - Keypad Room number
Keypad room number is ?, select a keypad room number to configure, touch

menu to go back.
5. [ ? ] Enter the keypad room number.
Keypad room number is ?, select a keypad room number to configure, touch

menu to go back.
6. [MENU] Moves back to step 4, keypad configuration.
4. [4] Option 4 - Keypad Starting Zone
Keypad starting zone is ?, select a keypad starting zone followed by enter,

touch menu to go back.
[ ? ] Enter the keypad starting zone
5.
[ENTER]
Keypad starting zone is ?, select a keypad starting zone followed by enter,

touch menu to go back.
6. [MENU] Moves back to step 4, keypad option selection
4. [5] Option 5 - Number of hours to Auto Test
Hours before next auto test is ?, select hours before next auto test followed

by enter, touch menu to go back.
[ ? ] Enter the hours till next auto test.
5.
[ENTER]
Hours before next auto test is ?, select hours before next auto test followed

by enter, touch menu to go back.
6. [MENU] Moves back to step 4, keypad option selection.
4. [6] Option 6 - Advanced keypad Configuration
Keypad option ? is enabled, keypad option ?is enabled Select from options 1

to 8 for advanced keypad configuration, touch menu to go back.
Toggle options 1 to 8 On or Off
5. [ ? ]
Keypad option ? is enabled / disabled, keypad option ?is enabled Select from

options 1 to 8 for advanced keypad configuration, touch menu to go back.
View partition LEDs for option selection confirmation. Refer to the Table 1 below

for descriptions.
Moves back to step 4, keypad option selection.
6. [MENU]
NX-181xx NetworX Voice keypad with touch buttons Installation Manual 11