Technical Data; Noise & Vibration - Hornbach 6119820 Manual

Technical Data

Type
Nominal voltage
Rated Power
No-load speed (n )
0
Grinding wheel arbour ø
Grinding wheel outer ø
Grinding wheel thickness
Top blade angle adjustment
Chain types suitable for sharpening
Net weight
Protection class
Sound pressure level (L
Measured sound power level (L
Max. vibration emission (a
The values given are valid for nominal voltages U of 230 V. For lower voltage and models for
specific countries, these values may vary.
Please observe the article number on the type plate of the machine. The trade names of the
individual machine may vary.
Noise & Vibration
The values given in these instructions have
been measured in accordance with a stand-
ardized measurement procedure specified in
EN 61029 and can be used to compare tools.
The declared vibration total value may also be
used in a preliminary assessment of exposure.
Try to keep vibration stress to a minimum.
Measures to reduce vibrations including wear-
ing gloves when using the tool and limiting the
working time. In this process, all segments
of the operating cycle must be taken into ac-
count (for instance times during which the
electric tool has been switched off as well as
periods during which it is on, but not running
under load).
Chain sharpener
220-240 V~
S2: 20 min 85 W
5500/min
23 mm
max. 108 mm
3.2 mm
+ 35° to - 35°
1/4" - 0.325" - 3/8" - 0.404" - 3/4"
2.0 kg
) 63.5 dB(A) /
pA
Uncertainty K = 3 dB(A)
)
76.5 dB(A) /
WA
Uncertainty K = 3 dB(A)
) < 2.5 m/s²
hw
Uncertainty K = 1.5 m/s²
/ II
Warning! The vibration emission
during actual use can differ from the
declared total value depending on the use
of the machine.
EN 141