Grinding Wheel Replacement - Hornbach 6119820 Manual

Grinding wheel replacement

Warning! Make sure the tool is switched off and unplugged.
1
Use a screwdriver to remove the three screws
holding the guard and remove the guard.
2
Remove the cap holding the grinding wheel
and remove the grinding wheel.
3
Place a new grinding wheel on the spindle of
the chain sharpener.
138 EN
1
2
3
Reinstall the cap to hold the grinding wheel
in place.
Hand tighten the cap.
Use a screwdriver to reinstall the guard at its
three mounting positions.
4
5
1
6
3
2