Troubleshooting - Hornbach 6119820 Manual

Troubleshooting

Warning! Make sure the tool is switched off and unplugged. Always wear protective
gloves.
Problem
Motor does not run The machine is not properly
Strong vibration of
the machine
140 EN
Possible cause
plugged into the mains
Power turned off
The sharpener is not properly
installed
The vise is not properly in-
stalled to the machine base
The grinding wheel is not
properly installed
Remedy
Properly plug the machine to a suitable
wall socket
Turn power on
Properly install the sharpener to a level
and stable surface
Properly install the vise to the machine
base
Properly install the grinding wheel