Hornbach 6119820 Manual page 137

Loosen vise knob
S1 To set the required vise angle, loosen
the vise lock knob 11.
Caution! Make sure the tool is
switched off and unplugged.
Raise chain stopper
S3 Raise the chain stopper
chine vise 9.
Lower chain stopper
S5 Lower the chain stopper
the saw chain towards the right until
a right-hand cutter is centred in the
vice 9. Pull the saw chain towards
the left until the cutter engages at the
chain stopper 6.
Lock chain
S7 If the proper distance is set on the
chain stopper screw 5
counter nut.
Tighten the chain lock lever
the chain in place.
Plug the supply cord 14
3
wall socket.
S2
6 of the ma- S4
gloves.
6 and pull S6
S8
lock it with the
7
to lock
to a suitable
Set top plate angle / B
Set the desired top plate angle at the
vise angle scale 10. Tighten the vise
lock knob 11.
Insert chain
Insert the saw chain into the chain
bar 8. The rotation direction is from left
to right.
Caution! The saw chain features
sharp edges. Wear
Lower grinding wheel
Carefully lower the grinding wheel
behind a right cutter. Use the chain
stopper screw 5 to set the required
distance between cutter and grinding
wheel 4.
Set cutting depth
With the grinding wheel still lowered,
set the required cutting depth on the
cutting depth screw 13 and lock it with
the counter nut.
protective
4
EN 137