Taurus LiquaFruits Pro Manual page 11

- Disconnect the appliance from the
mains when not in use and before
undertaking any cleaning task.
-Do not force the appliance's work
capacity.
- This appliance is for household use
only, not professional or industrial
use.
- This appliance is not a toy. Children
should be supervised to ensure that
they do not play with the appliance.
- This appliance is intended for adult
use. Ensure that this product is not
used by the disabled, children or
people unused to its handling.
- This appliance should be stored
out of reach of children and/or the
disabled.
-To push food down the feed tube,
always use the "pusher", never use
your fingers or any other device.
-Never leave the appliance unatten-
ded while in use.
- Any misuse or failure to follow the
instructions for use renders the gua-
rantee and the manufacturer's liability
null and void.
Instructions for use
Before use:
- Make sure that all the product's
packaging has been removed.
- Before using the product for the first
time, clean the parts that will come
into contact with food in the manner
described in the cleaning section.
Use:
- Unroll the cable completely before
plugging it in.
- Connect the appliance to the mains.
- Start the appliance by turning on the
speed regulator.
MANUAL Liquafruits pro ver II.indb 11
-Select the desired speed.
PLEASE NOTE: if the locking lever is
not correctly in position, the applian-
ce will not start.
- Place the juice receptacle under the
appliance's delivery tube.
- Insert the fruit or vegetable product
into the loading tube.
- Apply gentle pressure to the food
product with the plunger.
-The juice and the residual pulp will
automatically separate out: the juice
into the glass and the residual pulp
into the pulp collector.
- NB: If you process large quantities
of fruit, you will need to clean the
filter and remove the residual pulp on
a regular basis.
Once you have finished using the
appliance:
Leave the motor to run a few seconds
so that the last of the juice can be
extracted.
- Turn off the appliance by selecting 0
on the speed regulator.
- Unplug the appliance to the mains.
- Clean the appliance
Cleaning
- Disconnect the appliance from the
mains and let it cool before underta-
king any cleaning task.
- Dismantle the appliance as follows:
Before opening the blender, ensure
that the motor is completely turned
off
Open the locking lever
Remove the plunger from the protec-
tive lid
Remove the filter and the filter
support
11
16/04/10 13:02