Advertisement
Disposal notes
Mechanical design
Display and diagnostics
Building Technologies Division
The unit contains electrical and electronic components and must not be disposed of
together with domestic waste.
Local and currently valid legislation must be observed.
The housing is made of impact-proof, heat-resistant and flame-retarding plastic.
It is of plug-in design and engages audibly in the base.
Burner controls type LMO64... and AGK11.6 plug-in bases are silver-grey (RAL7001).
The housing accommodates the
microcontroller, which controls the program sequence, and the print relays for load
-
control,
electronic flame signal amplifier,
-
lockout reset button with its integrated multicolor signal lamp for status and fault
-
messages and the socket for connecting the OCI400 interface
Multicolor display of status and fault messages
-
Transmission of status and fault messages as well as detailed service information
-
by additional OCI400 interface and PC software ACS410
5/16
CC1N7138de
18.05.2016
Advertisement
