Optional) Installing The Smart Dongle - Huawei SUN2000 Series User Manual

SUN2000-(20KTL, 29.9KTL, 30KTL, 36KTL, 40KTL)-
M3
User Manual
Figure 5-8 Connecting the DC power cable
----End

5.6 (Optional) Installing the Smart Dongle

Procedure
●
Issue 01 (2020-10-15)
NO TE
● The WLAN-FE Smart Dongle is not provided in standard configuration.
● If your Smart Dongle is a WLAN-FE Smart Dongle or is configured with a SIM card, skip
this step. The configured SIM card can be used only on the Smart Dongle. The SIM card
is a China Mobile card. Before installation, check whether the site is effectively covered
by China Mobile signals. If not, prepare a SIM card of other carriers.
● If your Smart Dongle is not equipped with a SIM card, prepare a standard SIM card
(size: 25 mm x 15 mm) with the capacity greater than or equal to 64 KB.
● When installing the SIM card, determine its installation direction based on the silk
screen and arrow on the card slot.
● Press the SIM card in place to lock it, indicating that the SIM card is correctly installed.
● When removing the SIM card, push it inwards to eject it.
● When reinstalling the cover of the Smart Dongle, ensure that the buckle springs back in
place.
4G Smart Dongle
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
37